AOMOSUR
AM100 RV TPMS Sensor Cap
Official Replacement and Expansion Sensor for AM100
Replace a lost or damaged sensor, or expand a compatible AM100 TPMS installation. The compact external sensor screws directly onto the tire valve and sends live pressure and temperature data to the AM100 monitor.
- Designed for compatible AOMOSUR AM100 TPMS monitors
- Fast screw-on valve-stem installation
- Real-time pressure and temperature transmission
- IP67 water- and dust-resistant construction
- Anti-theft locking nut support
- Available as a single sensor or 4-sensor kit
Choose options
Official Replacement Sensor for the AOMOSUR AM100 TPMS
The AM100 TPMS Sensor Cap is designed for the AOMOSUR AM100 RV Tire Pressure Monitoring System. Replace a lost or damaged external sensor, or expand a compatible AM100 installation, with a compact screw-on sensor that sends live tire-pressure and temperature data to the AM100 monitor.
- Official AM100-compatible external TPMS sensor
- Fast screw-on valve-stem installation
- Real-time pressure and temperature transmission
- IP67 water- and dust-resistant construction
- Anti-theft locking nut support
- Single-sensor and 4-sensor kit options
Installation
- Turn on the AM100 monitor and allow it to complete its startup check.
- Install the anti-theft nut on the valve stem.
- Screw the sensor clockwise onto the valve until it is sealed.
- Tighten the anti-theft nut against the sensor with the supplied wrench.
- Confirm that the monitor shows the correct tire position and pressure.
Compatibility: Confirm that the sensor frequency and AM100 monitor version match before ordering.
AM100 Sensor specifications
Replacement-sensor and installation information synchronized from the original AOMOSUR listing.
Frequently asked questions
Compatibility, installation and troubleshooting guidance for the AM100 external sensor.
1. Which monitor is this sensor designed for?
It is designed for compatible AOMOSUR AM100 RV TPMS monitors. Confirm the monitor version and required sensor type before ordering.
2. Can I replace only one lost sensor?
Yes. Select the Single Sensor option, then assign the replacement sensor to the correct tire position on the AM100 monitor.
3. How is the sensor installed?
Install the anti-theft nut on the valve stem, screw the sensor clockwise onto the valve until sealed, then tighten the locking nut against the sensor.
4. What should I do if I hear air leaking?
Hold the sensor in place until the hissing stops, then continue tightening carefully. Confirm the final tire pressure and check the valve for leakage.
5. Why does the monitor show no sensor data?
Remove the sensor, wait about ten seconds and reinstall it. If needed, repeat the pairing procedure for the correct tire position.
6. Is the sensor waterproof?
It has IP67 water- and dust-resistant construction for normal road use. Avoid pressure washing the sensor directly or submerging it.
7. Does the 4-Sensor Kit contain four sensors?
Yes. The selected 4-Sensor Kit includes four compatible external sensors for a supported AM100 setup.
8. Can it be used with another TPMS brand?
Compatibility with other brands is not guaranteed. Use it with the supported AOMOSUR AM100 monitor version.
What’s included
Included components for the selected AOMOSUR product configuration.
- AM100 external TPMS sensor(s), according to the selected option
- Matching anti-theft locking nut(s)
- 1 × Installation wrench
- Pairing and installation guidance
Need help with compatibility or installation?
Our support team can help you choose, install and use your AOMOSUR product.